Neonatal Ventilator

Product Details:

There are still some neonates who cannot be adequately ventilated with even the most sophisticated conventional ventilation. Indeed, using conventional ventilation with higher rates and airway pressures has often led to an increased incidence of volutrauma and lung tissue damage. High Frequency Oscillation (HFO) has been shown to overcome this problem whilst still allowing excellent gaseous exchange.

A proven technique

Developed in cooperation with nurses and doctors, the SLE5000 uses a unique valveless system that gives both a manageable range of HFO parameters plus the ability to have active exhalation. Of course, the SLE5000 still has all of the conventional ventilation modes meaning that it can be used on virtually any baby in the NICU.

User Interface

SLE has always worked hard to make our ventilators easier to use. Essential functions are never more than a couple of button pushes away. Our own research has shown that users find it much easier to use a ventilator if there are fewer sub-menus. By reducing the number of menus and sub-menus the SLE5000 is even easier to use when time is critical. The SLE5000 has a high resolution colour touch-screen that is your interface to all the ventilator controls and functions, but in addition allows you to access many new features including trends and dynamic loops.


The SLE5000 also features parameter presetting, meaning that you can choose a ventilation mode and set up all parameter values before accepting these and confirming the mode change.

Machine Features

• The ability to preset parameters in all modes of operation
• Powerful HFO with active expiration to cover a wide range of patients
• Fullcolour, total touch-screen operation
• Integral flow monitoring measuring lung mechanics and displaying of loops and waveforms
• Trending of measured parameters
• Standard patient circuit for all modes including HFO
• Unique, patented valveless technology
• Integral battery with up to 60 minutes operating capability
• Software based, allowing for upgrading to versions with new or improved functions
• Very quiet operation HFOV, yet with the performance to successfully provide HFO to both the smallest pre-terms and the largest infants.
• Same patient circuit is used for conventional and HFO ventilation, minimising risk of lung de-recruitment.
• Proximal Hot Wire flow sensor technology ensures sensitivity to even the tiniest of patient breathing efforts, and control of tidal volumes as small as 2ml.
• Volume targeting capability to limit and monitor delivered tidal volumes as part of the Lung Protective Strategy.
• Colour display of respiratory waveforms and key respiratory parameters, in addition to 24 hour trending data.
• Simple upgrade capability to keep up to date with latest software and modality enhancements.
• Easy to set up, easy to use, easy to train, easy to clean (Spurce SLE UK Ltd)

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A

Product Details:

A new generation in Infant nCPAP Ventilation

WILAflow Elite is a microprocessor controlled, noninvasive infant ventilator, providing most advanced and diversified non-invasive nasal ventilation modes, including apnea wakeup function and automatic leakage compensation. WILAflow Elite allows proximal pressure monitoring without being affected by mechanical dead space in the closed loop and compliance. The device accurately measures patient's airway pressure. This is the most recognizable method in the industry.

Direct pressure setting

WILAflow Elite directly sets the value of pressure for fully automatic pressure control.

Direct Oxygen concentration setting

WILAflow Elite uses electronic air/oxygen blender technology with one simple button to set precisely the value of the needed oxygen concentration and can auto proportionate oxygen and airflow. High-precision flow sensor and proportional valve equipped enable real-time feedback and oxygen concentration precision with +3%.

Precise levels of Oxygen

WILAflow Elite delivers precise levels of O2 at positive pressure, which helps to keep alveoli open and thus improving oxygenation, while the infant breathes spontaneously. The variable WILAflow CPAP Generator helps to reduce the imposed WOB (work of breathing) during inhalation and exhalation.

Accurate and safe fresh gas delivery by iFlow

The Intelligent Closed-Loop Control System (iFlow) was designed to protect the most fragile patients. iFlow intelligently adjusts fresh gas flow and airway pressure in a closed loop. Proximal pressure monitoring (under the nose) and real-time leakage compensation enable stable pressure output. In case of leakage, iFlow will compensate gas in real time to guarantee stable positive airway pressure. It can compensate leakage up to a maximum of 25%, which is incomparable by traditional CPAP devices.

Safe ventilation weaning

WILAflow Elite features SNIPPV / NIPPV, NCPAP and HFNC modes for safe ventilation weaning. I

Warranty & Services

Warranty Summary 2 YearManufacturer'sWarranty

Warranty Service Type Representative Service Center

Covered in Warranty Machine warranty 2 years & Power Adapter comes with 1 year warranty

Not Covered in Warranty Physical Damage, Problems Caused by improper use

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A

Product Details:

Success in the area of top-class medical technology lies in the details. And it is in these details that the STEPHANIE neonatal ventilation system excels. The unique combination of ventilator, patient gas humidifier, oscillator and monitor available for the first time in this unit opens previously unimagined possibilities with regards to diagnostics and treatment. STEPHANIE is an excellent example of how clinical experience and technical expertise can lead to an outstanding product.

Conventional Respiration

STEPHANIE provides all conventional ventilation modes such as CPAP, S-IMV, A/C (assisted/controlled ventilation), V-CMV (volume-controlled ventilation) with various inspiration flow patterns as well as P-CMV (pressure-controlled ventilation) with various inspiratory pressure patterns. The V-CMV mode is equipped with leak-gas compensation with which the inspiratory leakage frequently associated with premature infants can, to a great extent, be offset. STEPHANIE now also offers PSV for patient-triggered ventilation procedures.

Volume Limited Ventilation

Premature infants undergoing controlled ventilation tend to synchronize their respiration to the ventilators rhythm, resulting in so-called entertainment. This can result in an undesirably high inspiration tidal volume and a possible volume trauma. In order to counteract this tendency, the P-CMV of the new STEPHANIE provides volume limitation. Once the expiration volume reaches the volume limit, the pressure of the subsequent inspiration is limited or applied at the lowest possible ventilation pressure, thus safely and quickly preventing an excessively high tidal volume. We refer to this as the minimum volume guarantee.

HFO Ventilation

The integrated high-frequency oscillation ventilation (HFOV) can be initiated at the push of a button and without any delay or the necessity of changing patient tubes. The unique patient ventilator means that there are no additional compressible volumes which can reduce the performance of the HFO.

+ Warranty and Services provided anywhere in India     

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A

Product Details:

The Sechrist IV-100B Infant Ventilator addresses infant ventilation needs with easy-to-use controls that permit rapid setting of ventilation parameters and allow clinicians to fine-tune to the greatest accuracy. The built-in displays provide easy-to-read continuous ventilation parameter information. The alarm system is comprehensive, but avoids information overload during alarm conditions. To prevent inadvertent PEEP when higher flow rates are required, a special exhalation value block and pediatric circuit are available.

 

The IV-100B is capable of meeting the most demanding requirements of the intensive care unit. You can ventilate newborn to pediatric patients with precise control of oxygen concentration, at respiratory rates of 1 to 150 breaths per minute. The Inspiratory and Expiratory Pressure controls are non-interactive. A simple, yet comprehensive alarm system monitors the parameters you have set up and notifies you of significant changes.

• Infant/Pediatric Ventilator with O2 Blender
• Addresses the infant ventilation needs simply and reliably
• Easy-to-use controls permit rapid setting of ventilation parameters and allow the clinician to fine tune to great accuracy
• The built-in displays provide easy-to-use continuous ventilation parameter information

General Features

• Recommended Applications: Neonatal, Infant, and Pediatric Ventilation
• Flow: 0-32 LPM, Flush 40 LPM
• FiO2: 0.21 to 1.00
• Mode: OFF, CPAP, VENT
• Inspiratory Time: 0.10 to 2.90 sec.
• Expiratory Time: 0.30 to 60.0 sec.
• I : E Ratio: 10:1 to 1:600 (Readout 1:0.1 to 1:99)
• Rate: 1 to 150 BPM
• Expiratory Pressure: 2 to 20 cm H2O; Zero Baseline possible at 24 LPM and higher rates
• Inspiratory Pressure: 5 to 70 cm H2O
• Manual Breath: Yes
• Alarms: Independent for Microprocessor; Low Airway Pressure, Leaks, Patient Disconnect, Fail to Cycle, Apnea, Prolonged Inspiration, and Peak Overpressure
• Alarm Delay Time: 3 to 60 sec.
• Alam Mute: 30 sec. ± 5 sec.
• Warranty and services provided anywhere in india

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A

Product Details:

AVI Healthcare offers innovative range of ventilatory support to pediatric and infant patients in ICU Choice of Configuration Range of Modes and Alarms Ideal Ventilator for Primary NICU Care
AVIA 1000 is available with or without the attached Air/O2 Blender. Blender allows user to set the OxygenConcentration between 21 to 100%.
Standard model has inbuilt air and oxygen flowmeterand flow levels can be set on colour tft display Using the colour touch screen display, User can set the appropriate pressure limited ventilator mode: Assist Control, SIMV, CPAP or CMV.
Available settable parameters include PIP, PEEP, Air Flow,O2 Flow, Trigger Level, Apnea, Alarms
This ventilator has been developed as a basic ventilator for the needs of Primary Nursery 
Operating ModesIt has following operating modes: CPAP, CMV, AC,SIMV
ControlsRespiratory rate - Adjustable in the range 3 - 300 cycles/minInspiratory Flow: 0.2 to 2.0 secsExpiratory Flow: 0.2 to 20 secsPIP - 0 to 80 cmH2OPEEP - 0 to 20 cmH2OAir Flow - 0 to 20 lpmOxygen Flow - 0 to 20 lpmFiO2 - 21% - 100%Trigger Mechanism - Pressure (-3 to 17 cmH2O)
Monitored Parameters:Mode, PIP, PEEP, MIP, MAP, Insp.Time, Exp. Time, Rate,Trigger level, SIMV RatioI/E Ratio, Apnea Time, Pressure Trigger
Display: Color Touch Screen TFT Display with pressure time curves and easy to use interface

Product Details:

Medical Ventilator provides support solutions for patients in respiratory distress. Vapotherm invented high flow therapy, and holds patents on technology and methods to deliver humidified respiratory gases at high flow rates. Vapotherm provides safe, comfortable and effective alternative to more invasive methods of ventilation support.

The Vapotherm Precision can be a suitable alternative to CPAP and can be used in many settings and in the treatment of symptoms of several respiratory distress disorders. The application of Vapotherm High Flow Therapy is in Neonatal Intensive Care Unit, Pediatric Intensive Care Unit, Adult Intensive Care Unit, Sub-Acute Care, and Palliative Care.

It is used to treat Respiratory Distress Disorders such as General Respiratory Failure, RSV (bronchiolitis), COPD, Pneumonia, Congestive Heart Failure and Asthma.

 

Specifications:

 

• Built-in oxygen blender. Oxygen percentage is fully adjustable from 21 to 100% when two 40 psi (276 KPa) gas sources are used.
• Inlet gas pressure range is 4-70 psi (28-482 KPa). At low gas inlet pressures, maximum flow rate and oxygen percentage settings are automatically reduced to match the inlet pressure.
• Two alarm levels indicate low and medium priority alarm conditions. IEC60601-1-8 compliant.
• Internal battery backup maintains flow and oxygen percentage for 15 minutes if AC power is cut off. Battery recharges in 1-2 hrs.

Benefits:

• No disinfection necessary. The patient circuit is detachable and disposable.
• Temperature, flow and oxygen percentage are adjusted via a single setting control knob on the front panel.
• Automatically senses cartridge type —maximum flow setting is automatically reduced if low-flow cartridge is installed.
• Easy connection between the delivery tube and disposable water path by a simple press and click fitting.
• All values and alarms displayed in a single large color-coded panel.
• Scheduled maintenance for internal components at 3 year intervals, external gas filters replaced at 6 month intervals, external oxygen sensor replaced annually.
• Universal power requirements allow use anywhere with only a change of power cord.

Warranty & Services:

• Warranty Summary : 2 Year Manufacturer’s Warranty
• Warranty Service Type: Service Center
• Covered in Warranty: Machine warranty 2 years & Power Adapter comes with 1 year warranty
• Not Covered in Warranty: Physical Damage, Problems Caused by improper use

Additional Information:

• Item Code: MV-004
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A

F&P Bubble CPAP System

Bubble CPAP is a unique form of CPAP. Infants on bubble CPAP have been reported to have chest wall vibrations similar to High Frequency Ventilation (HFV).

With the combined effects ofOptimal Humidityand natural pressure oscillations, bubble CPAP provides a protective, safe and effective method of respiratory support to spontaneously breathing neonates.

Infants on bubble CPAP were noted to have

• Reduced delivery room intubations
• Decreased days on mechanical ventilation
• Reduction in postnatal steroid use
• Increased postnatal weight gain and
• No increase in complications

Includes the Bubble CPAP generator, heated breathing circuits, humidification chamber and pressure manifold. Additional Starter Kit models include the F&P Infant Interface which consists of the F&P FlexiTrunk(TM) interface, infant bonnet and nasal prong (nasal masks available separately).

MR850 Heated Humidifier

One System for All Patients

The MR850 can be used for the full range of Fisher & Paykel Healthcare therapies across the F&P Respiratory Care Continuum(TM)

• One button selects optimal temperature and humidity levels for adult, pediatric and neonatal patients
• Easy set up with simple controls and an easy to read display
• Clinically based alarm system
• Advanced algorithms and the ability to sense flow optimises humidification delivery and minimises nuisance alarms
• Automatic standby during periods of gas flow interruption or water out

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
• Minimum Order Quantity: 1 Unit

Our heart beats for premature infants and newborns

Our full commitment and knowledge are focused on lung-protective solutions for respiratory support in order to ease the workload of hospital staff in the best way possible. With our innovations, we contribute to the survival of the smallest patients and support the gentlest possible start to life.

Premature infants and newborns need a familiar environment. Like the nursing staff, we also consider ourselves to be a part of this family. We work carefully, are solution-oriented, and respond to individual needs. In doing so, our focus is always on the welfare of the small patients and the quality of our products, just as it is on good service - worldwide. Longstanding relationships with customers and partners are the basis of a meaningful exchange of experiences and respectful collaboration.

We develop and produce nCPAP systems and consumables for premature infants and newborns for clinical application in the delivery room, in the intensive care ward and during transport. For more than 20 years (Source Medin Innovations GmbH)

Warranty & Services

• Warranty Summary 2 YearManufacturer'sWarranty
• Warranty Service Type Representative Service Center
• Covered in Warranty Machine warranty 2 years & Power Adapter comes with 1 year warranty
• Not Covered in Warranty Physical Damage, Problems Caused by improper useallback

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A